Latest Products https://www.shreelabinstrument.com Latest Products Mon, 25 May 2020 20:04:02 +0530 en-us https://www.shreelabinstrument.com High Temperature Laboratory Oven https://www.shreelabinstrument.com/high-temperature-laboratory-oven.htm https://www.shreelabinstrument.com/high-temperature-laboratory-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 Specifications : Hot Air Ovens are sturdy double walled units. Inner chamber made of S.S. and outer made of Mild steel with Powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated microme wire. Temp. is controlled by thermostat. Temp. range 50 degree c to to 250 degree c and Accuracy  +-2 degree c. Air ventilations are placed on top of both sides to remove hot gases / fumes. In Lab type oven heaters placed in the bottom side of unit. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G.I wire mesh.   Optional Accessories : Air Circulation Fan for Uniform Temperature. Digital Temp. controller cum indicator in lieu of thermostat. S.S Trays. Out side chamber made of stainless steel. High Temperature Oven https://www.shreelabinstrument.com/high-temperature-oven.htm https://www.shreelabinstrument.com/high-temperature-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 We haved specialized in sphere of MFG. a wide range of High Temp. Oven that are triple walled & fabricated with heavy gauge M.S.& S.S sheet further the inner surface can also made in M.S. or S.S. Technical specifications : Ovens are triple walled. Inner chamber made of either M.S. or S.S.304 Gap between the two walled filled with ceramic insulation to avoid heat of loses with insulation of 150 mm. Heating Element are made of special type Air heater of S.S. ‘U’ Type tubular heater. With special type of wiring connection from out side body. Supplied with air draft motorized blower to circulate uniform temp. Thought out chamber temp. Range 50 ˚C to 400 ˚C with accuracy of ± 2 ˚C controlled by digital temp. Controller cum indicator. Industrial Oven https://www.shreelabinstrument.com/industrial-oven.htm https://www.shreelabinstrument.com/industrial-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 This industrial oven is specially designed as per guideline of GMP supplied with IQ, OQ & PQ Document with Calibration report for PID Controller.   Specifications : Triple Walled construction. Inner made of S.S.316 Mirror polished Outer made of S.S.304 Dull finish. Gap Between the two walled filled with high grade glass wool insulation of 65 mm Heating Element is made of S.S. ‘U’ type tubular Nichrome wire with S.S. Sheathing. Heaters are placed at the right & left side of the inner chamber. PID Controller with auto tuning facility with double display to view set & current temp. Temp. Range 50 ˚C to 250 ˚C Silicon rubber gasket fitted on door to prevent lost of heat. Control Switch & pilot lamp are fitted on front panel supplied with S.S. Rod Type Jali. Ble controller with 8 steps   Optional Accessories : Digital timer to cut off the heater at set intervals PID controller with printer interface to record set valves & actual valves data 7 Timer. Single 4 point/8 point data logger. Air circulation for uniform Temp. Throughout chamber. Memmert Type Hot Air Oven  https://www.shreelabinstrument.com/memmert-type-hot-air-oven.htm https://www.shreelabinstrument.com/memmert-type-hot-air-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 Specifications : Hot Air Ovens are sturdy double walled units. Inner chamber made of S.S. and outer made of Mild steel with Powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elemets are made of high grade chrome plated microme wire. Temp. is controlled by thermostat. Temp. range 50 degree c to to 250 degree c and Accuracy  +-2 degree c. Air ventilations are placed on top of both sides to remove hot gases / fumes. In memmert type units heaters palced at the right and left side of inner chamber. All the control switches & pilot lamps are fitted on the front of panel. Trays should be supplied with G.I wire mesh.   Optional Accessories : Air Circulation Fan for Uniform Temprature. Digital Temp. controller cum indicator in lieu of thermostat. S.S Trays. Out side chamber made of stainless steel. Rectangular Vacuum Oven https://www.shreelabinstrument.com/rectangular-vacuum-oven.htm https://www.shreelabinstrument.com/rectangular-vacuum-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 Developed by using sophisticated techniques, our round vacuum oven is fabricated using qualitative stainless steel. Used in diverse industrial applications, our ovens can made tailored as per the requirements of our clients.   Specifications of vacuum oven : Double walled. Inside chamber constructed with thick stainless steel 304 Quality. Out side chamber manufactured with mild steel sheet pre greased, pretreated and powder coated for rust proofing. Proper glass wool insulation between the chambers to prevent heat loss. Operating temperature ranges from 50°C to 200"C with -2°C accuracy. Uniform drying through vacuum. Precise Vacuum control upto 30Hg, which are displayed on Analog gauge. For quick and uniform heating, the vacuum chamber is fiited with set of high quality heaters. Digital temp indicator cum controller helps in controlling the temperature. The Door has a thick tempered toughened glass window and is properly sealed with silicon rubber gasket for observation without disturbing thermal condition. Control panel on the front panel, with temperature controller, switches and indicating lamps. Round Vacuum Oven https://www.shreelabinstrument.com/round-vacuum-oven.htm https://www.shreelabinstrument.com/round-vacuum-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 Developed by using sophisticated techniques, our round vacuum oven is fabricated using qualitative stainless steel. Used in diverse industrial applications, our ovens can made tailored as per the requirements of our clients. Laboratory Incubator https://www.shreelabinstrument.com/laboratory-incubator.htm https://www.shreelabinstrument.com/laboratory-incubator.htm Fri, 21 Jun 2019 00:00:00 +0530 B.O.D. Incubator GMP Model https://www.shreelabinstrument.com/b-o-d-incubator-gmp-model.htm https://www.shreelabinstrument.com/b-o-d-incubator-gmp-model.htm Fri, 21 Jun 2019 00:00:00 +0530 Features : Designed specially biological Oxygen demand determination and other application like general incubation, serum studies and enzyme assays tests. Castor wheel mounted cabinet is double walled. Inner chamber made of Aluminium / S.S Outer chamber made of M.S with powder coating. Full length inner glass / acrylic door permits inspection of specimens with out disturbing the temperature. Temp. controlled by Digital Temp controlled cum indicator. Temprature range 5 degree c to 50 degree c with an accuracy of 0.5 degree c. This unit is fitted with door operated illumination lamp inside the chamber. Equipped with vermitically sealed compressor. Air Circulation Fan for maintaining temp. Uniformity through out the chamber. Flush Fitting insulated double walled door has magnetic gasket. The Chamber is provided with modular removable shelves made of S.S for complete flexibility is use. Inner Chamber is fitted with refrigeration evaporator, heater and Air Circulator for creating positive. Air flow through out the inner chamber for Temp. Uniformity. To work at 230V A.C only. Bacteriological Incubator https://www.shreelabinstrument.com/bacteriological-incubator.htm https://www.shreelabinstrument.com/bacteriological-incubator.htm Fri, 21 Jun 2019 00:00:00 +0530 Specifications : Incubators are sturdy double walled units. Inner chamber made of S.S and outer made of Mild Steel with Powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are made of high grade chrome plated nicrome wire. Temp. is controlled by thermostat. Air Ventilations are provided on the top of the unit to remove the hot gases / fumes. In Lab type incubators heaters are placed in the bottom side of the unit. All the control switches & pilot lamps are fitted on the front panel. Trays should be supplied with G.I wire mesh. BOD Incubators https://www.shreelabinstrument.com/bod-incubators.htm https://www.shreelabinstrument.com/bod-incubators.htm Fri, 21 Jun 2019 00:00:00 +0530 Our extensive range of B.O.D. Incubators has been designed especially for biological Oxygen demand determination & other applications like general incubators, Serum studies & Enzyme assays test. We can also customize the B.O.D. Incubators to suit the varied requirement of the clients with in stipulated time frame.    Technical Specifications : Double walled cabinet mounted on castor wheels Inner chamber made of S.S.304 & Outer chamber made of M. S. Powder coated Full Length inner acrylic door permit inspection of specimens with out disturbing the Temp. Temp. Controlled by solid State Digital controllers housing all the control with PT-100 sensor illumination light are provided for viewing with door limit switch. CFC Free hermetically sealed compressor provide temp. For below ambient condition. Air circulation fan for maintain Temp. Uniformity through out the chamber. Flush fitting insulated double walled door The Chamber is provided with modular removable shelves made of S. S. For complete flexibility in use Safety Features : Built in Temp Deviation Audio visual alarm, Safety thermostat for overshoot Temp. Cut off system. HRC Fuses for compressor heater & mains Time daily circuit for safety of compressor. This B.O.D.incubator Is available in below sizes Laboratory Bacteriological Incubator https://www.shreelabinstrument.com/laboratory-bacteriological-incubator.htm https://www.shreelabinstrument.com/laboratory-bacteriological-incubator.htm Fri, 21 Jun 2019 00:00:00 +0530 Our range of laboratory bacteriological incubators are available in different size from 35 Liters to 1000 Liters. These laboratory bacteriological incubators are based on latest Technology & are available in compact sizes. We used High grade M.S. Sheet & S. S. sheet for the manufacturing Process Ensuring Optimum Efficiency & Performance Level.    Features : Incubators are Sturdy Double walled Unit. Inner chamber made of S.S.304 & outer chamber made of M. S. powder coated. Gap between the two walled filled with glass wool insulation to avoid heat loses. Heating element is made of high grade chrome plate nichrome wire. Temp is controlled by thermostat. Air Ventilation is provided on the top of the unit to remove the hot gases/Fumes. In lab type incubator heaters are placed in the bottom side of the Unit All the control switches & Pilot lamps are fitted on the front panel. Tray should be supplied with G.I. ware Mesh.   Optional Accessories:  Digital Temp. Controller cum indicator in Live of thermostat with Accuracy ± 0.5 °C Air circulation Fan for Uniform Temp Digital Timer S. S. Wire mesh jail Memmert Incubator  https://www.shreelabinstrument.com/memmert-incubator.htm https://www.shreelabinstrument.com/memmert-incubator.htm Fri, 21 Jun 2019 00:00:00 +0530 Our company has specialized in the sphere of fabricating a wide range of Memmert Incubators that is sturdy in construction & durable. We used high grade raw materials that is procured from the renowned vendors of the country for the mgf. process for ensuring high efficiency of the memmert incubators. Available in different sizes, we can also customize these incubator as per the requirement of Clients. Memmert Type Bacteriological Incubator https://www.shreelabinstrument.com/memmert-type-bacteriological-incubator.htm https://www.shreelabinstrument.com/memmert-type-bacteriological-incubator.htm Fri, 21 Jun 2019 00:00:00 +0530 Features : Bactriological Incubators are sturdy double walled units. Inner chamber made of S.S and outer made of mild steel with Powder coating. Gap between the walls fitted with glass wool insulation to avoid heat loses. Heating elements are maade of high grade crome plated nicrome wire. Air ventilations are placed on top of both sides to remove hot gases / fumes. In memmert type units heaters placed at the right & left side of inner chamber. All the control switches & pilots lamps are fitted on the front panel. Trays should be supplied with G.I wire mesh.   Optional Accessories : Air Circulation Fan for Uniform Temperature. Digital Temp. Controller cum indicator in lie of thermostat with an accuracy of +- 1 degree c. S.S Trays. Out side chamber made of Stainless steel. Tray Dryer https://www.shreelabinstrument.com/tray-dryer.htm https://www.shreelabinstrument.com/tray-dryer.htm Fri, 21 Jun 2019 00:00:00 +0530   Features : Applications : Tray Dryers are ideally suitable for drying chilies, spices, papads, potato chips, onions, fish, garlic, grapes, cashew nuts, confectionery, macaroni, wood etc. It is also for used for drying pharmaceuticals, chemicals, powders, granules, plastic granules etc. Heating is either by electric or steam or both combined. Various models are listed in this leaflet to suit customer requirements. Custom-built models can be quoted on request.  Construction : The external frame work is made of thick gauge M. S plates both the exterior made of thick gauge CRCA sheets or AISI 304 sheets. in between the space, resin bonded special quality fiber glass heat insulation slabs are provided. safety guards for fan blade & heaters are provided. The interiors is painted with heat resistant aluminum paint. The exterior is spray painted with silver gray gloss paint, Inner Chamber - CRCA or AISI 304, Outer Chamber - CRCA or AISI 304. Fan & Motor : According to models doors are provided with smooth moving hinges, latch catch & sealing gaskets. Well balanced large propeller type fan (S) fitted inside the chamber with suitable shaft & dual bearing with Electric motor (S) drive. Controls Panel : Control Panel box consists of contactor assembly, On & Off switch, Digital Controller neon lamps, operating push buttons are incorporated in the control Box. Damper : Adjustable exhaust Damper with an arrangement for pre-filtration, in the air inlet. Optional : GMP models / complete S.S unit. Trolleys & Trays supplied as per requirement. Microprocessor based temp. Control with printer interface (Centronic PC interface with RS 232 CPC / RS-485 for networking of controllers. Profile controller for Ramp / Soak cyclic applications. Safety Features : Built-in temp. deviation audio visual alarm. Safety thermostat for over shoot temp. cut off circuit to cut off the whole systems in case of malfunction. (only applicable to Microprocessor based models). Validation : IQ OQ PQ & DQ Protocols with complete documentation & certification traceable to National & international Standards. Steam Heated Models : These are provided with finned tubular steam coils instead of /in addition to heaters, along with solenoid valve. Laboratory Furnace https://www.shreelabinstrument.com/laboratory-furnace.htm https://www.shreelabinstrument.com/laboratory-furnace.htm Fri, 21 Jun 2019 00:00:00 +0530 Muffle Furnace https://www.shreelabinstrument.com/muffle-furnace.htm https://www.shreelabinstrument.com/muffle-furnace.htm Fri, 21 Jun 2019 00:00:00 +0530 Features : It is light weight and fast heating equipment. Most useful for Ashing, Fasions, Igniting and heat treating of small parts in chemical, industria fields, colleges. Out side body made up heavy gauge M.S / G.I duly powder coated Inner muffle with high Temp. Insulating material. Maximum temperatures 1000 degree c / 1200 degree c & working temperature 930 degree c / 1130 degree c. Temp. controlled by Digital Temperature Controller cum Indicator. Heating elements made up of kanthal wire would extremely on the muffle. Control panel fitted on top of the units with indicating Lamps & Switches. A Uniform heat distribution through all 4 side with kenthal wire. A special solid state silver fuse for protection to elements in case of over heating. Operates on 230 Volts A.C only. Various Sizes available. Melting Point Apparatus https://www.shreelabinstrument.com/melting-point-apparatus.htm https://www.shreelabinstrument.com/melting-point-apparatus.htm Fri, 21 Jun 2019 00:00:00 +0530 Details : It is usable to estimate the Melting Points of chemicals, Pharmaceuticals, Food Etc. This is very useful to determine the melting point of any substance. Max Temp. upto 350 degree c. Consist with aluminium cylindrical block of heating. Radial holes admits a thermometer and glass capillary. Temp. controlled by energy regulator. Regulator fitted to the unit and with high, low heat switch. Laminar Air flow https://www.shreelabinstrument.com/laminar-air-flow.htm https://www.shreelabinstrument.com/laminar-air-flow.htm Fri, 21 Jun 2019 00:00:00 +0530 Laminar Air Flow Chamber https://www.shreelabinstrument.com/laminar-air-flow-chamber.htm https://www.shreelabinstrument.com/laminar-air-flow-chamber.htm Fri, 21 Jun 2019 00:00:00 +0530 Our GMP model, Laminar air flow chambers are available in Vertical as well as Horizontal Models and used where high-tech manufacturing and assembly takes place and thus widely found in semiconductor assembly, biotechnology, pharmaceutical, aerospace, food, medical devices and hospitals.    These Laminar air flow chambers are tested on various quality parameters to ensure smooth functioning and manufactured with Class 100 airflow in the work region in accordance to US FED STD 209.  Vertical Laminar Air Flow https://www.shreelabinstrument.com/vertical-laminar-air-flow.htm https://www.shreelabinstrument.com/vertical-laminar-air-flow.htm Fri, 21 Jun 2019 00:00:00 +0530 Our vertical laminar air flow has vertical direction flow and particle retention above 0.5 micron. These are appreciated for their low noise and versatile usage. These have been designed with latest technology and can also be designed as per the specifications, provided by our clients.    Application : The vertical laminar air flow cabinets is designed to provide a high degree of protection for process products In laboratories and production facilities. Many critical applications in the medical, pharmaceutical, nuclear-power, and micro electronic fields demand an ultra-clean work environment which is free from biological and particulate contamination.   Operation : Ambient Air is draw in through pre-filter and is introduced in the work zone through the HEPA filter. The average velocity in the work zone is maintained between 0.4 and 0.5 m/s. Air cleanliness in the work zone is better than class 3.5 (100) in accordance with US FED STD 209 E   Construction : The cabinets are fabricated out of thick board duly sunmica clad or mild steel cabinet duly epoxy coated. The work table is made of thick board which is sunmica clad at top or S. S Table top will be provided as optional accessories. All joints are sealed with silastic sealant. Side panels are provided of thick transparent acrylic sheets.    The unit is fitted with pre-filter and is made to pass through highly effective HEPA (High Efficiency Particular Air) filter having efficiency rating as high as 99.997% with hot, DOP, thus retaining all air-borne particles of size : 0.3 micron and larger. Using a dynamic machine, the blower and motor assembly is statically and dynamically balanced. Blowers are mounted on vibration isolation mounts to minimize vibration. The working is illuminated by fluorescent lightings fitted to the unit. Height of the working table provides comfortable “ Sit Down” working position for the operation to work on 220/230 volts AC. supply. Scientific Instruments https://www.shreelabinstrument.com/scientific-instruments.htm https://www.shreelabinstrument.com/scientific-instruments.htm Fri, 21 Jun 2019 00:00:00 +0530 Stability Cooling Chambers https://www.shreelabinstrument.com/stability-cooling-chambers.htm https://www.shreelabinstrument.com/stability-cooling-chambers.htm Fri, 21 Jun 2019 00:00:00 +0530 Also known as Environmental Test Chambers / Humidity Control Ovens – Double Walled – Inner SS – Outer MS – 3" Gap Puff insulation; Full length inner glass door for clear inner vies Outer metal door with magnetic gaskets & lock. Forced air circulation for uniform temperature throughout the chamber. Dual display preset electronic digital Temperature controller Cum Indicator with cooling system by means of Hermetically sealed Compressor Unit coupled with evaporation Coil and Condenser.  Filter Holder https://www.shreelabinstrument.com/filter-holder.htm https://www.shreelabinstrument.com/filter-holder.htm Fri, 21 Jun 2019 00:00:00 +0530 These holders for vacuum filtration accept 47 mm diameter filters. the filter support is stainless steel screen The ring allows autoclaving with a filter in position without stick age of the filter to the support, and also protects from breakage. it has a rim around the upper edge to simplify the positioning of the funnel and to avoid displacement of the filter. And a silicon O-Ring in the avoid The screen fits between top and base part, and the whole is held together with a practical hand clamp.   The holders are supplied with a silicone lid, but without a bored stopper to fit them onto a suction Flask. Such a stopper must be additionally ordered according to the diameter required. When large numbers of samples are to tested, three or six holders can be used simultaneously buy fitting them on to manifolds.   Application : Microbiological quality control, e .g testing of water, soft drink, beer and wine. Collection of particles for analysis, e. g. for the gravimetric determination of forging solid material in lubricating oils acc. to DIN 51592, and the microscopy of particles in infusion solutions to determine their origin Clarifying or ultra cleaning of liquid Environmental Test Chamber https://www.shreelabinstrument.com/environmental-test-chamber.htm https://www.shreelabinstrument.com/environmental-test-chamber.htm Fri, 21 Jun 2019 00:00:00 +0530 Leveraging on our dexterous workforce, we offer environmental test chamber, which is developed from leak proof materials. Known for their durability and reliability, our test chambers are available in the following standard sizes Cryostat Bath https://www.shreelabinstrument.com/cryostat-bath.htm https://www.shreelabinstrument.com/cryostat-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 We offer cryostat bath that provides a simple and reliable solution for obtaining consistent results. Available in varied confioguration and specific requirement of our clients, below mentioned are the technical details of our products Water Bath https://www.shreelabinstrument.com/water-bath.htm https://www.shreelabinstrument.com/water-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 Constant Temperature Water Bath https://www.shreelabinstrument.com/constant-temperature-water-bath.htm https://www.shreelabinstrument.com/constant-temperature-water-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 Features : Double walled in construction. Inner chamber and lie made of Stainless Steel. Outer chamber made of Mild Steel with powder coating. Glass window is fixed on the front for both sides clearobservation while immersion test. The gap between the chamber filled with high grade glass wool to minimise the heat loss. Temp. Range from ambient to 100 degree c and temp. Controlled by digital temp. Indicator cum controller with an accuracy of +- 0.5 degree c. A high speed stirrer with a motor of 1/20 HP is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber. The heating mechanism comprises of set of heaters pertaining to fast heating to operated 230 volts AC only. Designed for immersion requirements and for external Circulation to maintain Constant temp. Digital Oil Bath https://www.shreelabinstrument.com/digital-oil-bath.htm https://www.shreelabinstrument.com/digital-oil-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 We manufacture and supply digital oil bath. Double walled outer mild steel and stainless steel & Inner S.S.304 argon welded digital oil bath is supplied with thermostat.  Applications : Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards   Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top..   Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.    Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.    Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.    Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor. Low Temperature Water Bath https://www.shreelabinstrument.com/low-temperature-water-bath.htm https://www.shreelabinstrument.com/low-temperature-water-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 We manufacture and supply low temperature water bath. It has the following    Features :  Applications Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards. Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top. Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.  Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.  Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.  Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor. Rectangular Water Bath https://www.shreelabinstrument.com/rectangular-water-bath.htm https://www.shreelabinstrument.com/rectangular-water-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 Rectangular water bath is useful for boiling and general purpose work. Rectangular Water Bath is made up of long lasting single walled kettle element. Made of thick guage stainless steel, the lid is having 6 or 12 holes with concentric rings.  Serological Water Bath https://www.shreelabinstrument.com/serological-water-bath.htm https://www.shreelabinstrument.com/serological-water-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 Features : Double walled in construction. Inner chamber and lie made of Stainless Steel.  Outer chamber made of Mild Steel with powder coating. Gap between the walls filled with glass wool insulation to avoid the heat loss. The inner chamber heated with immersion type heating elements is covered. Long costing heating elements. To operates on 230 volts A.C. Only.  A high speed stirrer with a motor of 1/20 HP is fitted to the unit for continuous stirring and this can maintain a uniform heating throughout the chamber. The heating mechanism comprises of set of heaters pertaining to fast heating to operated 230 volts AC only. Designed for immersion requirements and for external Circulation to maintain Constant temp. To Operated 230 Volts AC only. Viscosity Bath https://www.shreelabinstrument.com/viscosity-bath.htm https://www.shreelabinstrument.com/viscosity-bath.htm Fri, 21 Jun 2019 00:00:00 +0530 We manufacture and supply low temperature water bath. It has the following    Features:  Applications : Equipment specially designed for tests in the field of Medical, Agricultural, Bio-chemical, R & D & Q.C Laboratories & to suit the various IS standards. Construction : Double walled, Exterior of CRCA/GI Epoxy Powder coated & Inner chamber of AISI S.S 304, with PUF insulation, S. S. Lid on top. Circulation : Efficient motor of 1440 RPM top mounted is installed for stirring to get temp uniformity. Refrigeration System : Hermitically sealed compressor provides temp. for below ambient conditions, Double stage compressors with cascade system for Temp. -40ºC / -70ºC, Refrigerant CFC Free.  Option : Models available as per GMP/Complete S.S unit, Microprocessor based PID temp. control with printer interface, RS 232 CPC / RS 485 interface for multiple networking of controller.  Validation : Validation Protocols for IQ OQ PQ & DQ complete documentation with reports, Calibration & Test Certificates traceable to national & International Standards.  Safety Features : Safety thermostat for over shoot of temp., safety circuit to cut off the whole systems in case of malfunction. (Applicable to based models only) HRC fuses for compressors, heaters & mains, time delay circuit for safety of compressor. Laboratory Oven https://www.shreelabinstrument.com/laboratory-oven.htm https://www.shreelabinstrument.com/laboratory-oven.htm Mon, 24 Jun 2019 00:00:00 +0530 Autoclaves https://www.shreelabinstrument.com/autoclaves.htm https://www.shreelabinstrument.com/autoclaves.htm Mon, 24 Jun 2019 00:00:00 +0530 Automatic Vertical Autoclave https://www.shreelabinstrument.com/automatic-vertical-autoclave.htm https://www.shreelabinstrument.com/automatic-vertical-autoclave.htm Mon, 24 Jun 2019 00:00:00 +0530 Automatic vertical autoclaves are specially designed for medical clinical bacterogical & research laboratories Pharmaceuticals, Fertilizer Plant, Breweries soft Drink mfg. etc.    Features:- • Reliable convinient method of steam sterllization.• Inner Chamber made up of thick S.S• Outer Chamber made up of M.S / S.S. Immersion type heater should be provided. Lid is made up of S.S and die pressed.• It is equipped with pressure gauge, steam realese valve and safety valves.• This instruments supplied with Aluminium / S.S Basket.• Pressure controls by spring valves.• It is used for sterllization under working steam pressure upto 15 PSI.• Fitted with silicon rubber gasket jointless, to work on 230 volts A./C. only.   Optional Accessories  • Foot lifting arrangement.• Digital Temprature indicator cum Controller.• Water Level indicator.• Auto Cut Off. Fully Automatic Autoclave https://www.shreelabinstrument.com/fully-automatic-autoclave.htm https://www.shreelabinstrument.com/fully-automatic-autoclave.htm Mon, 24 Jun 2019 00:00:00 +0530   Designed to provide complete, efficient sterillization at low cost, these compact sterilizers are ideal for steam sterillization of labware, wrapped or unwrapped dressing, liquid media and similar application.    Standard Features• Outer Body of SS mirror finish, inner body SS LM 304. Lid of thick SS designed to withstand pressure up to 30 PSI, operating pressure 15-22 PSI, factory set at 15 PSI.• Fitted with Pressure gauge, safety valve, steam release valve.• Additional safety with extra steam realese valve & safety temp controller.• Digital temperature controller / indicator to control temperature / pressure with temp indication. Factory set for 121C (15 PSI) with build in digital adjustable timer with auto cut off.• Foot lifting arrangement (18"*24*& 22"*30" only)• electrically operated on 230V / 50HZ